nanoFramework.Iot.Device.Sps30 1.1.889

Prefix Reserved
dotnet add package nanoFramework.Iot.Device.Sps30 --version 1.1.889
                    
NuGet\Install-Package nanoFramework.Iot.Device.Sps30 -Version 1.1.889
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Sps30" Version="1.1.889" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.Sps30" Version="1.1.889" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.Sps30" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.Sps30 --version 1.1.889
                    
#r "nuget: nanoFramework.Iot.Device.Sps30, 1.1.889"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#:package nanoFramework.Iot.Device.Sps30@1.1.889
                    
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.889
                    
Install as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.889
                    
Install as a Cake Tool

Sensirion SPS30 Particulate Matter Sensor

This is a library to interact with the Sensirion SPS30 Particulate Matter Sensor. Currently, only the UART interface using the SHDLC protocol is implemented. The SPS30 also supports I2C.

sps30-image.png

Documentation

  • The datasheet for this sensor can be found here

Usage for the UART interface

Important: make sure you properly setup the UART pins for ESP32 before creating the SerialPort. For this, make sure you install the nanoFramework.Hardware.Esp32 NuGet and use the Configuration class to configure the pins:

Configuration.SetPinFunction(4, DeviceFunction.COM2_TX);
Configuration.SetPinFunction(15, DeviceFunction.COM2_RX);

Initialize the SerialPort, wrap it in the ShdlcProtocol, then pass to the Sps30Sensor:

var serial = new SerialPort("COM2", 115200, Parity.None, 8, StopBits.One);
var shdlc = new ShdlcProtocol(serial, timeoutInMillis: 10000);
var sps30 = new Sps30Sensor(shdlc);

Use the sps30 to interact with the sensor, e.g.:

var version = sps30.ReadVersion();
Debug.WriteLine($"SPS30 detected: {version}");

Collect a measurement reliably:

try { sps30.StopMeasurement(); } catch { } // In case already measuring from a previous run
sps30.StartMeasurement(MeasurementOutputFormat.Float);
Thread.Sleep(5000); // SPS30 requires some time before it can sample data
var measurement = sps30.ReadMeasuredValues();
Debug.WriteLine($"Measurement: {measurement}");

The above would output the following:

SPS30 detected: ID=00080000, serial=4E1AD1BB796C64C5, version=Firmware V2.1, Hardware V7, SHDLC V2.0, status=RawRegister: 0, FanSpeedOutOfRange: False, LaserFailure: False, FanFailureBlockedOrBroken: False, cleaninginterval=604800
Measurement: MassConcentration [µg/m³] PM1.0=2.00064229965, PM2.5=5.78215932, PM4.0=8.74958038, PM10.0=9.3430643, NumberConcentration [#/cm³] PM0.5=5.54537582, PM1.0=12.034433364, PM2.5=15.72880268, PM4.0=16.44550895, PM10.0=16.58645629, TypicalParticleSize[nm]=675.40591955

Check out the sample for more information.

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.1.889 110 7/28/2025
1.1.880 199 4/24/2025
1.1.869 208 4/2/2025
1.1.864 200 4/2/2025
1.1.852 201 3/11/2025
1.1.846 202 3/10/2025
1.1.838 147 3/3/2025
1.1.822 155 2/26/2025
1.1.790 146 2/5/2025
1.1.775 156 2/4/2025
1.1.772 157 2/4/2025
1.1.755 146 1/31/2025
1.1.743 140 1/20/2025
1.1.737 127 1/13/2025
1.1.729 126 1/8/2025
1.1.718 137 12/30/2024
1.1.704 140 12/18/2024
1.1.696 137 12/16/2024
1.1.673 149 10/23/2024
1.1.662 157 10/11/2024
1.1.656 143 10/3/2024
1.1.639 173 9/6/2024
1.1.631 145 8/28/2024
1.1.613 178 8/9/2024
1.1.601 139 7/26/2024
1.1.590 156 7/17/2024
1.1.573 168 6/19/2024
1.1.570 163 6/14/2024
1.1.548 155 5/15/2024
1.1.536 161 4/15/2024
1.1.514 170 3/22/2024
1.1.494 151 2/28/2024
1.1.462 256 1/5/2024
1.1.458 181 12/20/2023
1.1.436 178 11/10/2023
1.1.416 143 11/8/2023
1.1.403 168 10/6/2023
1.1.396 169 9/27/2023
1.1.384 184 9/6/2023
1.1.378 198 8/16/2023
1.1.369 199 8/2/2023
1.1.363 197 7/28/2023
1.1.357 211 7/19/2023
1.1.354 202 7/14/2023
1.1.345 194 6/21/2023
1.1.341 198 6/14/2023
1.1.337 202 6/7/2023
1.1.335 192 6/2/2023
1.1.329 198 5/26/2023
1.1.313 206 5/12/2023
1.1.302 199 5/10/2023
1.1.297 201 5/3/2023
1.1.273 277 3/17/2023
1.1.267 293 3/10/2023
1.1.263 286 3/8/2023
1.1.259 318 2/27/2023
1.1.256 328 2/24/2023
1.1.253 317 2/22/2023
1.1.222 365 1/9/2023
1.1.212 357 1/5/2023
1.1.208 359 1/3/2023
1.1.203 370 12/28/2022
1.1.159 439 11/14/2022
1.1.158 412 11/13/2022
1.1.153 428 11/5/2022
1.1.141 457 10/25/2022
1.1.128 453 10/22/2022
1.1.117 481 10/10/2022
1.1.114 470 10/8/2022
1.1.89 491 9/16/2022
1.1.87 549 9/15/2022
1.1.63 467 9/3/2022
1.1.47 489 8/15/2022
1.1.40 494 8/6/2022
1.1.38 501 8/5/2022
1.1.35 474 8/4/2022
1.1.28 486 8/1/2022
1.1.13 497 7/24/2022
1.1.10 487 7/23/2022
1.0.29.3202 505 7/7/2022
1.0.20.52556 473 6/30/2022
1.0.8.35854 522 6/26/2022
1.0.3.8772 485 6/24/2022
1.0.1.57221 496 6/23/2022
0.0.0 503 6/16/2022