nanoFramework.Iot.Device.Sps30 1.1.869

Prefix Reserved
There is a newer version of this package available.
See the version list below for details.
dotnet add package nanoFramework.Iot.Device.Sps30 --version 1.1.869
                    
NuGet\Install-Package nanoFramework.Iot.Device.Sps30 -Version 1.1.869
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Sps30" Version="1.1.869" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.Sps30" Version="1.1.869" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.Sps30" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.Sps30 --version 1.1.869
                    
#r "nuget: nanoFramework.Iot.Device.Sps30, 1.1.869"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#:package nanoFramework.Iot.Device.Sps30@1.1.869
                    
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.869
                    
Install as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.869
                    
Install as a Cake Tool

Sensirion SPS30 Particulate Matter Sensor

This is a library to interact with the Sensirion SPS30 Particulate Matter Sensor. Currently, only the UART interface using the SHDLC protocol is implemented. The SPS30 also supports I2C.

sps30-image.png

Documentation

  • The datasheet for this sensor can be found here

Usage for the UART interface

Important: make sure you properly setup the UART pins for ESP32 before creating the SerialPort. For this, make sure you install the nanoFramework.Hardware.Esp32 NuGet and use the Configuration class to configure the pins:

Configuration.SetPinFunction(4, DeviceFunction.COM2_TX);
Configuration.SetPinFunction(15, DeviceFunction.COM2_RX);

Initialize the SerialPort, wrap it in the ShdlcProtocol, then pass to the Sps30Sensor:

var serial = new SerialPort("COM2", 115200, Parity.None, 8, StopBits.One);
var shdlc = new ShdlcProtocol(serial, timeoutInMillis: 10000);
var sps30 = new Sps30Sensor(shdlc);

Use the sps30 to interact with the sensor, e.g.:

var version = sps30.ReadVersion();
Debug.WriteLine($"SPS30 detected: {version}");

Collect a measurement reliably:

try { sps30.StopMeasurement(); } catch { } // In case already measuring from a previous run
sps30.StartMeasurement(MeasurementOutputFormat.Float);
Thread.Sleep(5000); // SPS30 requires some time before it can sample data
var measurement = sps30.ReadMeasuredValues();
Debug.WriteLine($"Measurement: {measurement}");

The above would output the following:

SPS30 detected: ID=00080000, serial=4E1AD1BB796C64C5, version=Firmware V2.1, Hardware V7, SHDLC V2.0, status=RawRegister: 0, FanSpeedOutOfRange: False, LaserFailure: False, FanFailureBlockedOrBroken: False, cleaninginterval=604800
Measurement: MassConcentration [µg/m³] PM1.0=2.00064229965, PM2.5=5.78215932, PM4.0=8.74958038, PM10.0=9.3430643, NumberConcentration [#/cm³] PM0.5=5.54537582, PM1.0=12.034433364, PM2.5=15.72880268, PM4.0=16.44550895, PM10.0=16.58645629, TypicalParticleSize[nm]=675.40591955

Check out the sample for more information.

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.1.880 177 4/24/2025
1.1.869 190 4/2/2025
1.1.864 182 4/2/2025
1.1.852 183 3/11/2025
1.1.846 184 3/10/2025
1.1.838 129 3/3/2025
1.1.822 138 2/26/2025
1.1.790 129 2/5/2025
1.1.775 137 2/4/2025
1.1.772 141 2/4/2025
1.1.755 128 1/31/2025
1.1.743 125 1/20/2025
1.1.737 110 1/13/2025
1.1.729 108 1/8/2025
1.1.718 119 12/30/2024
1.1.704 123 12/18/2024
1.1.696 118 12/16/2024
1.1.673 133 10/23/2024
1.1.662 141 10/11/2024
1.1.656 126 10/3/2024
1.1.639 155 9/6/2024
1.1.631 128 8/28/2024
1.1.613 155 8/9/2024
1.1.601 123 7/26/2024
1.1.590 140 7/17/2024
1.1.573 151 6/19/2024
1.1.570 145 6/14/2024
1.1.548 137 5/15/2024
1.1.536 145 4/15/2024
1.1.514 155 3/22/2024
1.1.494 136 2/28/2024
1.1.462 237 1/5/2024
1.1.458 166 12/20/2023
1.1.436 169 11/10/2023
1.1.416 133 11/8/2023
1.1.403 158 10/6/2023
1.1.396 158 9/27/2023
1.1.384 164 9/6/2023
1.1.378 175 8/16/2023
1.1.369 176 8/2/2023
1.1.363 173 7/28/2023
1.1.357 187 7/19/2023
1.1.354 177 7/14/2023
1.1.345 168 6/21/2023
1.1.341 171 6/14/2023
1.1.337 175 6/7/2023
1.1.335 166 6/2/2023
1.1.329 170 5/26/2023
1.1.313 178 5/12/2023
1.1.302 172 5/10/2023
1.1.297 174 5/3/2023
1.1.273 250 3/17/2023
1.1.267 265 3/10/2023
1.1.263 259 3/8/2023
1.1.259 288 2/27/2023
1.1.256 298 2/24/2023
1.1.253 289 2/22/2023
1.1.222 337 1/9/2023
1.1.212 329 1/5/2023
1.1.208 332 1/3/2023
1.1.203 343 12/28/2022
1.1.159 411 11/14/2022
1.1.158 383 11/13/2022
1.1.153 397 11/5/2022
1.1.141 428 10/25/2022
1.1.128 424 10/22/2022
1.1.117 452 10/10/2022
1.1.114 441 10/8/2022
1.1.89 462 9/16/2022
1.1.87 519 9/15/2022
1.1.63 437 9/3/2022
1.1.47 460 8/15/2022
1.1.40 465 8/6/2022
1.1.38 472 8/5/2022
1.1.35 445 8/4/2022
1.1.28 458 8/1/2022
1.1.13 467 7/24/2022
1.1.10 456 7/23/2022
1.0.29.3202 474 7/7/2022
1.0.20.52556 442 6/30/2022
1.0.8.35854 492 6/26/2022
1.0.3.8772 455 6/24/2022
1.0.1.57221 465 6/23/2022
0.0.0 473 6/16/2022