nanoFramework.Iot.Device.SparkFunLcd 1.1.852

Prefix Reserved
.NET Framework This package is compatible with all versions of .NET Framework.
There is a newer version of this package available.
See the version list below for details. 
dotnet add package nanoFramework.Iot.Device.SparkFunLcd --version 1.1.852
                    


                    

                
NuGet\Install-Package nanoFramework.Iot.Device.SparkFunLcd -Version 1.1.852
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="nanoFramework.Iot.Device.SparkFunLcd" Version="1.1.852" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
<PackageVersion Include="nanoFramework.Iot.Device.SparkFunLcd" Version="1.1.852" />
                    


                            Directory.Packages.props
                        

                    

                
<PackageReference Include="nanoFramework.Iot.Device.SparkFunLcd" />
                    


                            Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package. 
paket add nanoFramework.Iot.Device.SparkFunLcd --version 1.1.852
                    


                    

                
#r "nuget: nanoFramework.Iot.Device.SparkFunLcd, 1.1.852"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
#addin nuget:?package=nanoFramework.Iot.Device.SparkFunLcd&version=1.1.852
                    


                            Install nanoFramework.Iot.Device.SparkFunLcd as a Cake Addin
                        

                    

                
#tool nuget:?package=nanoFramework.Iot.Device.SparkFunLcd&version=1.1.852
                    


                            Install nanoFramework.Iot.Device.SparkFunLcd as a Cake Tool

LCD library for SparkFun RGB Serial Open LCD display (sizes 20x4 or 16x2) with I2C connection

Use SparkFunLcd.cs to drive SparkFun LCD modules via I2C.

For example product information see SparkFun LCD-16398

The code contained in this driver is based on see OpenLCD

Usage

For instance the following code writes a simple message to the display,

var settings = new I2cConnectionSettings(busId: 1, deviceAddress: SparkFunLcd.DefaultI2cAddress, busSpeed: I2cBusSpeed.StandardMode);
using (var i2cDevice = I2cDevice.Create(settings))
{
    using (var lcd = new SparkFunLcd(i2cDevice, SparkFunLcd.DisplaySizeEnum.Size20x4))
    {
        lcd.SetBacklight(Color.FromArgb(0, 255, 0));
        lcd.SetContrast(4);
        lcd.SetDisplayState(false);
        lcd.Clear();
        lcd.Write(0, 0, "SparkFun 20x4 SerLCD");
        lcd.Write(0, 1, "P/N# LCD-16398");
        lcd.SetDisplayState(true);
    }
}

(code validated against Adafruit Huzzah32 Feather)

Example usage

Custom Characters

  • As shown in the photo above custom characters can be defined
  • Up to eight custom characters can be defined numbered 0x0 thru 0x7
  • for information on generating the byte array character bit mask see link
// demonstrating custom characters
{
    lcd.CreateCustomCharacter(0, new byte[] { 0x0, 0x1b, 0xe, 0x4, 0xe, 0x1b, 0x0, 0x0 }); // define custom character 0x0
    lcd.CreateCustomCharacter(1, new byte[] { 0x0, 0x1, 0x3, 0x16, 0x1c, 0x8, 0x0, 0x0 }); // define custom character 0x1

    lcd.Clear();
    lcd.SetCursorPosition(0, 0);
    lcd.Write(new char[] { '\x0', '\x1' }); // write custom character 0x0 followed by custom character 0x1
}

Important note on use of I2C pins

Important: make sure chip pins are properly configured as I2C pins, for instance for ESP32,

// configure ESP32 device I2C bus
{
    // note: actual pin-out is specific to Adafruit Huzzah32 Feather on which code was tested
    int dataPin = Gpio.IO23;
    int clockPin = Gpio.IO22;
    Configuration.SetPinFunction(dataPin, DeviceFunction.I2C1_DATA);
    Configuration.SetPinFunction(clockPin, DeviceFunction.I2C1_CLOCK);
}
Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
1.1.864 135 4/2/2025
1.1.852 161 3/11/2025
1.1.822 107 2/26/2025
1.1.772 116 2/4/2025
1.1.755 113 1/31/2025
1.1.737 88 1/13/2025
1.1.696 106 12/16/2024
1.1.673 109 10/23/2024
1.1.665 104 10/16/2024
1.1.662 104 10/11/2024
1.1.651 106 9/27/2024
1.1.631 121 8/28/2024
1.1.580 126 6/28/2024
1.1.570 129 6/14/2024
1.1.548 128 5/15/2024
1.1.436 244 11/10/2023
1.1.435 120 11/10/2023
1.1.429 100 11/10/2023
1.1.329 177 5/26/2023
1.1.313 150 5/12/2023
1.1.308 147 5/11/2023
1.1.304 158 5/10/2023
1.1.297 161 5/3/2023
1.1.222 315 1/9/2023
1.1.212 308 1/5/2023
1.1.208 302 1/3/2023
1.1.203 302 12/28/2022
1.1.159 382 11/14/2022
1.1.153 381 11/5/2022
1.1.141 396 10/25/2022
1.1.128 388 10/22/2022
1.1.87 488 9/15/2022
1.1.82 480 9/14/2022
1.0.30.8772 442 6/24/2022
1.0.27.2032 421 6/23/2022
1.0.1.45819 419 6/7/2022