nanoFramework.Iot.Device.Bq2579x 1.0.506

Prefix Reserved
.NET Framework This package is compatible with all versions of .NET Framework. 
dotnet add package nanoFramework.Iot.Device.Bq2579x --version 1.0.506
                    


                    

                
NuGet\Install-Package nanoFramework.Iot.Device.Bq2579x -Version 1.0.506
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="nanoFramework.Iot.Device.Bq2579x" Version="1.0.506" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
<PackageVersion Include="nanoFramework.Iot.Device.Bq2579x" Version="1.0.506" />
                    


                            Directory.Packages.props
                        

                    

                
<PackageReference Include="nanoFramework.Iot.Device.Bq2579x" />
                    


                            Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package. 
paket add nanoFramework.Iot.Device.Bq2579x --version 1.0.506
                    


                    

                
#r "nuget: nanoFramework.Iot.Device.Bq2579x, 1.0.506"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
#:package nanoFramework.Iot.Device.Bq2579x@1.0.506
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package. 
#addin nuget:?package=nanoFramework.Iot.Device.Bq2579x&version=1.0.506
                    


                            Install as a Cake Addin
                        

                    

                
#tool nuget:?package=nanoFramework.Iot.Device.Bq2579x&version=1.0.506
                    


                            Install as a Cake Tool

BQ2579x/BQ25792/BQ25798 - Buck-boost battery charger

This library supports several Bq2579x devices, namely:

  • The BQ25798 is an I²C controlled, 1-4-cell, 5-A buck-boost solar battery charger with dual-input selector and MPPT.
  • The BQ25792 is an I²C controlled, 5-A, 1-4 cell buck-boost charger with dual-input selector and USB PD 3.0 OTG output.

Documentation

Device & EVM

Sensor image
VQFN 29 pins chip package
Simplified schematic
Simplified schematic
Evaluation Module
Evaluation Module

Usage

Warning: If using an ESP32, make sure to properly setup the I2C pins before creating the I2cDevice. Add a reference to nanoFramework.Hardware.ESP32 NuGet package and add the following code lines:

//////////////////////////////////////////////////////////////////////
// when connecting to an ESP32 device, need to configure the I2C GPIOs
// used for the bus
Configuration.SetPinFunction(21, DeviceFunction.I2C1_DATA);
Configuration.SetPinFunction(22, DeviceFunction.I2C1_CLOCK);

For other devices like STM32, please make sure you're using the preset pins for the I2C bus you want to use.

Hardware Required

  • BQ25798 EVM
  • Male/Female Jumper Wires

Circuit

  • SCL - SCL
  • SDA - SDA
  • VCC - 5V
  • GND - GND

Code

The following code creates an I2C configuration and instantiates a Bq25798 object. Then it prints the Minimum System Voltage detected by the device at boot. Last it enters a loop where it prints the current Vbus voltage each second.

I2cConnectionSettings settings = new I2cConnectionSettings(1, Bq25798.DefaultI2cAddress);
I2cDevice device = I2cDevice.Create(settings);

using (Bq25798 charger = new Bq25798(device))
{
    Debug.WriteLine("");
    Debug.WriteLine($"BQ25798 connected to I2C{device.ConnectionSettings.BusId}");
    Debug.WriteLine("");

    Debug.WriteLine($"Minimum System Voltage is config @ {charger.MinimalSystemVoltage.VoltsDc:N3}V");

    while (true)
    {
        Debug.WriteLine($"Current Vbus: {charger.Vbus.VoltsDc:N3}V");

        Debug.WriteLine("");

        Thread.Sleep(1000);
    }
}

Acknowledgments

The development of this library was kindly sponsored by OrgPal.IoT!

orgpallogo.png

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.0.506 198 4/2/2025
1.0.501 175 4/2/2025
1.0.489 193 3/11/2025
1.0.483 192 3/10/2025
1.0.459 142 2/26/2025
1.0.435 143 2/11/2025
1.0.412 129 2/4/2025
1.0.409 134 2/4/2025
1.0.392 129 1/31/2025
1.0.380 137 1/20/2025
1.0.374 112 1/13/2025
1.0.355 117 12/30/2024
1.0.333 129 12/16/2024
1.0.310 144 10/23/2024
1.0.293 116 10/3/2024
1.0.279 143 9/10/2024
1.0.276 142 9/6/2024
1.0.268 123 8/28/2024
1.0.250 146 8/9/2024
1.0.238 104 7/26/2024
1.0.227 142 7/17/2024
1.0.210 143 6/19/2024
1.0.207 131 6/14/2024
1.0.173 161 4/15/2024
1.0.151 163 3/22/2024
1.0.131 150 2/28/2024
1.0.111 159 1/24/2024
1.0.99 196 1/5/2024
1.0.95 167 12/20/2023
1.0.73 175 11/10/2023
1.0.53 133 11/8/2023
1.0.40 169 10/6/2023
1.0.33 155 9/27/2023
1.0.21 184 9/6/2023
1.0.15 214 8/16/2023
1.0.8 208 8/2/2023
1.0.6 210 8/2/2023
1.0.1 205 7/31/2023