magic.lambda.strings 14.0.10

Manipulating strings from Hyperlambda

This project contains string manipulation slots for Magic. More specifically, it gives you the following slots.

• [strings.replace] - Replaces occurrencies of the specified argument with the value of its specified argument
• [strings.replace-not-of] - Replaces all characters found in string, except those found in its single argument
• [strings.capitalize] - Turns the first character in your string into a CAPS
• [strings.concat] - Concatenates two or more strings
• [strings.contains] - Returns true if specified string contains the given argument
• [strings.ends-with] - Returns true if the specified string ends with the specified argument
• [strings.starts-with] - Returns true if the specified string starts with its argument
• [strings.join] - Joins multiple strings together, with a separating string between each string joined
• [strings.length] - Returns the length in characters of the given string
• [strings.regex-replace] - Replaces occurrencies matching the given regular expression with its argument
• [strings.split] - Splits a string into multiple strings on every match of its given argument
• [strings.to-lower] - Returns the lower caps version of its given argument
• [strings.to-upper] - Returns the upper caps version of its specified argument
• [strings.trim] - Trims a string, optionally for all characters found in its argument
• [strings.trim-start] - Trims a string only to its left, optionally for all characters found in its argument
• [strings.trim-end] - Trims a string only to its right, optionally for all characters found in its argument
• [strings.url-encode] - URL encodes the specified string
• [strings.url-decode] - URL decodes the specified string
• [strings.substring] - Returns the sub-string of the specified string
• [strings.matches] - Returns the regular expression matches found from specified source

Usage

All the above slots that requires two arguments, will use the first argument as its "what" argument, and the second as its "with" argument. Avoiding naming these though, allows you to reference other slots, and use these as sources to parametrize your invocations to the above slots. Below is an example of how this would look like.

.data:Hyperlambda is cool

strings.replace:x:-
   .:cool
   .:super cool

[strings.replace]

This slot replaces occurrencies of a string inside a string, with some other string. The simplest version is like follows.

.foo:thomas hansen

strings.replace:x:-
   .:hansen
   .:tjobing hansen

You can also reference slots and dynamic slots for that matter, assuming your slots somehow returns strings, or something that can be converted into a string, such as the following illustrates. Notice, this code will throw an exception, since there are probably no slots called "some-slot-returning-string" in your installation.

.what:hansen
.foo:thomas hansen

strings.replace:x:-

   get-value:x:@.what

   signal:some-slot-returning-string
      arg1-to-slot:foo
      arg2-to-slot:foo

Above the first argument is "what to look for", and the second argument is "what to substitute it with". The above is a general pattern for most of these slots, where the node arguments supplied to the slot will be evaluated as a lambda object, before the arguments are consumed, allowing you to use arguments that are the result of invoking other slots as arguments to your original outer most slot.

[strings.replace-not-of]

This slot will replace every single character in your original string, that cannot be found in its first argument, with the value of its second argument. This slot is useful if you want to remove all characters that cannot be found in another character set, such as the following illustrates.

strings.replace-not-of:foo bar1howdy
   .:abcdefghijklmnopqrstuvwxyz
   .:-

The above will result in the following result

strings.replace-not-of:foo-bar-howdy

[strings.capitalize]

Turns the first character of your string into a CAPS character.

strings.capitalize:thomas

/*
 * Resulting in "Thomas" after invocation.
 */

[strings.concat]

Concatenates a list of strings into one string. Similar to [strings.join], except it doesn't take a separating character.

.bar:Bar
strings.concat
   .:Thomas
   .:" "
   .:Hansen
   .:" "
   .:Foo
   .:" "
   get-value:x:@.bar

/*
 * Resulting in "Thomas Hansen Foo Bar" after invocation.
 */

[strings.contains]

Returns true if the specified string contains some sequence of characters.

// Returns true
strings.contains:Thomas Hansen Is Cool
   .:Hansen

[strings.ends-with]

Returns true if the specified string ends with some sequence of characters.

// Returns true
strings.ends-with:Thomas Hansen Is Cool
   .:Cool

// Returns false
strings.ends-with:Thomas Hansen Is Coolio
   .:Cool

[strings.starts-with]

Returns true if the specified string starts with some sequence of characters.

// Returns true
strings.ends-with:Thomas Hansen Is Cool
   .:Thomas

// Returns false
strings.ends-with:Thomas Hansen Is Cool
   .:Hansen

[strings.join]

Similar to [strings.concat], except it also takes an optional separating character, allowing you to concatenate a bunch of strings, and making sure each original string is separated by some sequence of strings.

.src
   .:foo
   .:bar
strings.join:x:@.src/*
   .:,

/*
 * Results in "foo,bar"
 */

[strings.length]

Returns the length of a string as an integer number.

// Returns 6
strings.length:thomas

[strings.regex-replace]

Replaces matches of the given regular expression with some static sequence of characters.

// Results in "FOO bar hansen"
strings.regex-replace:foo bar hansen
   .:fo+
   .:FOO

The first argument is what regular expression to match, the second argument is what to replace all matches with.

[strings.split]

Splits a string into multiple strings, where a sequence of characters can be found, removing the original sequence of characters from the resulting node set.

.foo:some input string
strings.split:x:-
   .:' '

The above will result in the following result.

.foo:some input string
strings.split:x:-
   .:some
   .:input
   .:string

[strings.to-lower]

Turns every single character in your input string into a lowercase character.

strings.to-lower:Thomas Hansen Is Cool

// Results in "thomas hansen is cool"

[strings.to-upper]

Turns every single character in your input string into a UPPER case character.

strings.to-upper:Thomas Hansen Is Cool

// Results in "THOMAS HANSEN IS COOL"

[strings.trim], [strings.trim-start], [strings.trim-end]

Trims a string, either both sides, only the start of it, or only the end of it, for occurrencies of characters found in the sequence of characters provided as its argument.

strings.trim:09thomas12
   .:1234567890

// Results in "thomas"

[strings.url-encode]

URL encodes a string. Example can be found below.

strings.url-encode:thomas@servergardens.com

Resulting in the following after execution.

strings.url-encode:thomas%40servergardens.com

[strings.url-decode]

URL decodes a string, the opposite of [strings.url-encode]. Example can be found below.

strings.url-encode:thomas@servergardens.com
strings.url-decode:x:-

Resulting in the following after execution.

strings.url-encode:thomas%40servergardens.com
strings.url-decode:thomas@servergardens.com

[strings.substring]

Returns a substring of the specified string.

.input:Foo Bar Howdy World
strings.substring:x:-
   .:5
   .:7

The above will result in the following.

strings.substring:ar Howd

Notice, the second argument is the number of characters to return and not the offset into the string of where to stop returning. In such a regard, it works the same way as the C# Substring method.

[strings.matches]

Returns all regular expression matches from specified source string.

.input:Foo Bar Howdy World {match1} and {match2} and that was it
strings.matches:x:-
   .:"\\{.+?\\}"

The above will result in the following.

strings.matches
   .:{match1}
   .:{match2}

Notice, the second argument is the number of characters to return and not the offset into the string of where to stop returning. In such a regard, it works the same way as the C# Substring method.

Project website

The source code for this repository can be found at github.com/polterguy/magic.lambda.strings, and you can provide feedback, provide bug reports, etc at the same place.

Quality gates