ForgeTrust.AppSurface.Web 0.1.0-preview.2

AppSurface Web

The ForgeTrust.AppSurface.Web package provides the bootstrapping logic for building ASP.NET Core applications using the AppSurface module system. It sits on top of the compilation concepts defined in ForgeTrust.AppSurface.Core.

Overview

The easiest way to get started is by using the WebApp static entry point. This provides a default setup that works for most applications.

await WebApp<MyRootModule>.RunAsync(args);

For more advanced use cases where you need to customize the startup lifecycle beyond what the options provide, you can extend WebStartup<TModule>.

Key Abstractions

WebApp

The primary entry point for web applications. It handles creating the internal startup class and running the application. It provides a generic overload WebApp<TModule> for standard usage and WebApp<TStartup, TModule> if you have a custom startup class.

IAppSurfaceWebModule

Modules that want to participate in the web startup lifecycle should implement this interface. It extends IAppSurfaceHostModule and adds web-specific hooks:

• ConfigureWebOptions: Modify the global WebOptions (e.g., enable MVC, configure CORS).
• ConfigureWebApplication: Register middleware using IApplicationBuilder (e.g., app.UseAuthentication()).
• ConfigureEndpoints: Map endpoints using IEndpointRouteBuilder (e.g., endpoints.MapGet("/", ...)).

WebStartup

The base class for the application bootstrapping logic. While WebApp uses a generic version of this internally, you can extend it if you need deep customization of the host builder or service configuration logic.

Features

MVC and Controllers

Support for MVC approaches can be configured via WebOptions:

• None: For pure Minimal APIs (default).
• Controllers: For Web APIs using controllers (AddControllers).
• ControllersWithViews: For traditional MVC apps with views.
• Full: Full MVC support.

CORS

Built-in support for CORS configuration:

• Enforced Origin Safety: When EnableCors is true, you MUST specify at least one origin in AllowedOrigins, unless running in Development with EnableAllOriginsInDevelopment enabled (the default). If AllowedOrigins is empty in production or when EnableAllOriginsInDevelopment is disabled, the application will throw a startup exception to prevent unintended security openness (verified by tests EmptyOrigins_WithEnableCors_ThrowsException and EnableAllOriginsInDevelopment_AllowsAnyOrigin).
• Development Convenience: EnableAllOriginsInDevelopment (enabled by default) automatically allows any origin when the environment is Development, simplifying local testing without compromising production security.
• Default Policy: Configures a policy named "DefaultCorsPolicy" (configurable) and automatically registers the CORS middleware.

Endpoint Routing

Modules can define their own endpoints, making it easy to slice features vertically ("Vertical Slice Architecture").

Browser Status Pages

AppSurface Web includes conventional browser-facing pages for empty 401, 403, and 404 status responses. The feature is designed for human browser requests: it keeps the original HTTP status code, shows recovery-oriented HTML, and leaves JSON/API responses alone.

Browser status pages in 2 minutes

If your app already uses MVC views, keep the default Auto mode:

public void ConfigureWebOptions(StartupContext context, WebOptions options)
{
    options.Mvc = options.Mvc with { MvcSupportLevel = MvcSupport.ControllersWithViews };
}

If your app starts with controllers only but still wants the browser pages, opt in explicitly:

public void ConfigureWebOptions(StartupContext context, WebOptions options)
{
    options.Mvc = options.Mvc with { MvcSupportLevel = MvcSupport.Controllers };
    options.Errors.UseConventionalBrowserStatusPages();
}

Preview the built-in pages while the app is running:

Override any page with the conventional app or shared Razor Class Library path:

Use BrowserStatusPageModel in overrides:

@model ForgeTrust.AppSurface.Web.BrowserStatusPageModel

<h1>HTTP @Model.StatusCode</h1>
<p>@Model.OriginalPath</p>

Mode behavior:

Important behavior:

• Only empty 401, 403, and 404 responses from GET or HEAD requests that accept text/html or application/xhtml+xml are re-executed.
• JSON, non-HTML, non-empty, and non-GET/HEAD responses keep their original API-friendly behavior.
• Missing default documentation 404 routes include a documentation search recovery link because stale docs links are the most common browser miss. The default RazorDocs route family is /docs, so the default recovery target is /docs/search. Apps that set RazorDocs:Routing:RouteRootPath should derive the search target from that root, for example RazorDocs:Routing:RouteRootPath=/foo/bar points stale-docs recovery links at /foo/bar/search.
• Static export remains conservative: RazorWire CLI probes /_appsurface/errors/404 and writes only 404.html; it does not emit 401.html or 403.html. In CDN mode, that 404.html page is validated and rewritten with the rest of the static output.
• Production 500 exception pages are intentionally separate from browser status pages and must be enabled with UseConventionalExceptionPage().

Conventional Production 500 Pages

AppSurface Web can also own a safe browser-facing production 500 page for unhandled exceptions. This is off by default because exception handling is usually application policy. Opt in through WebOptions.Errors.UseConventionalExceptionPage() when a normal MVC-style app wants a generic HTML failure page without writing exception middleware by hand.

await WebApp<MyRootModule>.RunAsync(
    args,
    options => options.Errors.UseConventionalExceptionPage());

The conventional exception page uses ASP.NET Core exception handling, not status-code pages. That distinction matters: status-code pages can render empty 404 or 500 responses, but they do not catch thrown exceptions. AppSurface registers the exception handler early enough to catch module middleware and endpoint failures, then renders a Razor view only for requests that accept text/html or application/xhtml+xml.

• The default view returns HTTP 500, generic recovery copy, a home link, and a request id that operators can correlate with logs.
• The default ExceptionPageModel contains only StatusCode and RequestId; it does not expose exception messages, stack traces, headers, cookies, route values, or form fields.
• Applications can override the page with ~/Views/Shared/500.cshtml. Keep the page generic and support-oriented. Do not read IExceptionHandlerFeature, request headers, cookies, route values, or form values unless the app has a deliberate reviewed disclosure policy.
• Development keeps its existing developer exception behavior. AppSurface does not install the conventional production handler when StartupContext.IsDevelopment is true.
• API-only apps, JSON problem-details APIs, tenant-specific error pages, or apps with telemetry-first exception middleware should leave this disabled and register their own exception handling.
• Once ASP.NET Core has started a response, exception handling cannot replace it with the conventional page. Design streaming endpoints so failures are reported through the stream protocol rather than relying on a late 500 page.

Configuration and Port Overrides

The web application supports standard ASP.NET Core configuration sources (command-line arguments, environment variables, and appsettings.json).

Deterministic Development Port Default

When an AppSurface web application starts in Development without explicit endpoint configuration, AppSurface Web chooses a deterministic localhost-only fallback URL based on the current workspace path. That gives each local worktree a stable URL instead of every development environment fighting for the same hard-coded dev port.

• Use this default for local dotnet run convenience when you do not care about a specific port ahead of time.
• Override it any time with --port, --urls, ASPNETCORE_URLS/URLS, ASPNETCORE_HTTP_PORTS/DOTNET_HTTP_PORTS/HTTP_PORTS, ASPNETCORE_HTTPS_PORTS/DOTNET_HTTPS_PORTS/HTTPS_PORTS, urls/http_ports/https_ports in appsettings, or Kestrel:Endpoints in appsettings/environment variables.
• Treat the startup log as the source of truth for the selected local URL.
• The automatic fallback binds only http://localhost:{port}. Use --port or an explicit wildcard URL when you intentionally need LAN/container access.

Port Overrides

You can override the application's listening port using several methods:

1. Command-Line: Use --port (shortcut) or --urls.

   dotnet run -- --port 5001
   # OR
   dotnet run -- --urls "http://localhost:5001"
   

2. Environment Variables: Set ASPNETCORE_URLS.

   export ASPNETCORE_URLS="http://localhost:5001"
   dotnet run
   

3. App Settings: Configure urls in appsettings.json.

   {
     "urls": "http://localhost:5001"
   }
   

4. Kestrel Endpoints: Configure named endpoints when you need protocol, certificate, or endpoint-specific settings.

   {
     "Kestrel": {
       "Endpoints": {
         "Http": {
           "Url": "http://localhost:5001"
         }
       }
     }
   }
   

📂 Back to Web List | 🏠 Back to Root