DHI.EUM 22.0.3

Prefix Reserved
.NET Standard 2.0 This package targets .NET Standard 2.0. The package is compatible with this framework or higher.
There is a newer version of this package available.
See the version list below for details. 
dotnet add package DHI.EUM --version 22.0.3                

                    
                

            
NuGet\Install-Package DHI.EUM -Version 22.0.3
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="DHI.EUM" Version="22.0.3" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
paket add DHI.EUM --version 22.0.3                

                    
                

            
#r "nuget: DHI.EUM, 22.0.3"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
// Install DHI.EUM as a Cake Addin
#addin nuget:?package=DHI.EUM&version=22.0.3

// Install DHI.EUM as a Cake Tool
#tool nuget:?package=DHI.EUM&version=22.0.3

EUM is the DHI Engineering Unit Management system.

This Package targets both .NET and native C/C++ projects, i.e. it contains C/C++ header and lib files for building C/C++ programs that want to use the EUM libraries.

NOTE: This package is 64-bit only. Please be sure to target x64 when building. For troubleshooting, visit the NuGet section on the Project Site/URL

Product Compatible and additional computed target framework versions.
.NET net5.0 was computed.  net5.0-windows was computed.  net6.0 was computed.  net6.0-android was computed.  net6.0-ios was computed.  net6.0-maccatalyst was computed.  net6.0-macos was computed.  net6.0-tvos was computed.  net6.0-windows was computed.  net7.0 was computed.  net7.0-android was computed.  net7.0-ios was computed.  net7.0-maccatalyst was computed.  net7.0-macos was computed.  net7.0-tvos was computed.  net7.0-windows was computed.  net8.0 was computed.  net8.0-android was computed.  net8.0-browser was computed.  net8.0-ios was computed.  net8.0-maccatalyst was computed.  net8.0-macos was computed.  net8.0-tvos was computed.  net8.0-windows was computed. 
.NET Core netcoreapp2.0 was computed.  netcoreapp2.1 was computed.  netcoreapp2.2 was computed.  netcoreapp3.0 was computed.  netcoreapp3.1 was computed. 
.NET Standard netstandard2.0 is compatible.  netstandard2.1 was computed. 
.NET Framework net461 was computed.  net462 was computed.  net463 was computed.  net47 was computed.  net471 was computed.  net472 was computed.  net48 was computed.  net481 was computed. 
MonoAndroid monoandroid was computed. 
MonoMac monomac was computed. 
MonoTouch monotouch was computed. 
native native is compatible. 
Tizen tizen40 was computed.  tizen60 was computed. 
Xamarin.iOS xamarinios was computed. 
Xamarin.Mac xamarinmac was computed. 
Xamarin.TVOS xamarintvos was computed. 
Xamarin.WatchOS xamarinwatchos was computed. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

  • .NETStandard 2.0

  • native 0.0

NuGet packages (19)

Showing the top 5 NuGet packages that depend on DHI.EUM:

Package Downloads
DHI.DFS

DFS is the DHI Data File System, a binary data file format for handling spatially distributed and time dependent data, ranging from measurements of temperature at a single point, to water levels in entire oceans. This Package targets both .NET and native C/C++ projects, i.e. it contains C/C++ header and lib files for building C/C++ programs that want to use the DFS libraries. NOTE: This package is 64-bit only. Please be sure to target x64 when building. For troubleshooting, visit the NuGet section on the Project Site/URL
DHI.Mike1D.Generic

MIKE 1D Generic Generic library for the MIKE 1D system. MIKE 1D is a 1-dimensional numerical simulation engine that simulates water flow in a network. NOTE: This package is 64-bit only. Please be sure to target x64 when building. For troubleshooting, visit the NuGet section on the Project Site/URL
DHI.Mike1D.ResultDataAccess

MIKE 1D ResultDataAccess The DHI.Mike1D.ResultDataAccess component provides common access to a variety of network file formats. It is the main data access component for the MIKE 1D result files, having the .res1d extension. It does also provide support for reading result files from SWMM (.out), EPANet (.res, .resx), Water Hammer (.whr), MIKE 11 (.res11) and MIKE URBAN/MOUSE (.prf, .crf and the likes). MIKE 1D is a 1-dimensional numerical simulation engine that simulates water flow in a network. NOTE: This package is 64-bit only. Please be sure to target x64 when building. For troubleshooting, visit the NuGet section on the Project Site/URL
DHI.Platform.SDK

Package Description
DHI.Chart.Map

Charting component for plotting MIKE data. NOTE: This package is 64-bit only. Please be sure to target x64 when building. For troubleshooting, visit the NuGet section on the Project Site/URL

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
22.1.0 939 8/12/2024
22.0.3 9,558 12/11/2023
21.0.0 24,203 1/2/2023
20.1.0 18,361 5/31/2022
20.0.0 49,560 11/25/2021
19.1.0 7,189 5/21/2021
19.0.0 14,267 11/19/2020
18.1.0 3,527 8/7/2020
18.0.0 2,086 12/20/2019
17.2.0 592 12/19/2019

Release 2024 of MIKE software