ADotNet 2.0.5

ADotNet (ADO Dot Net)

ADotNet is a.NET library that enables software engineers on the .NET platform to develop AzureDevOps pipelines and Git Actions in C#.

Introduction

There's an issue today with developing Azure DevOps pipelines and Git Actions with YAML. The technology/language can be quite challenging to learn and predict what the available options are when it comes to orchestrating build steps.

ADotNet presents a solution to pipeline tasks as C# models. Predefined, with all the options available to orchestrate a pipeline without having to search for the available options on the documentation websites.

How It Works for AzureDevOps

Here's how this library works. Let's assume you want to write a task in your pipeline that restores packages for your ASP.NET Core project. Today, engineers write the following command in YAML:

- task: DotNetCoreCLI@2
  displayName: 'Restore'
  inputs:
    command: 'restore'
    feedsToUse: 'select'

The problem with the above YAML code is that it's not that easy to remember. Even while I'm starting at it right now, I just can't seem to remember DotNetCoreCLI@2 and what does all of this means to someone who is a full-stack engineer trying to get off the ground as soon, easy and as fast as possible? Here's how the very same code above would look like in ADotNet:

  new DotNetExecutionTask
  {
      DisplayName = "Restore",

      Inputs = new DotNetExecutionTasksInputs
      {
          Command = Command.restore,
          FeedsToUse = Feeds.select
      }
  }

The options here are available with the power of strongly typed options and Enums. You don't have to think about what needs to go there. It's already directing you towards the options you need to get going with building your pipeline.

How It Works for Git Actions

Here's how this library works. Let's assume you want to write a task in your pipeline that uses a particular version for your ASP.NET Core project. Today, engineers write the following command in YAML:

- name: Setup .Net
    uses: actions/setup-dotnet@v1
    with:
      dotnet-version: 6.0.100-rc.1.21463.6
      include-prerelease: true

The problem with the above YAML code is that it's not that easy to remember. Even while I'm starting at it right now, I just can't seem to remember actions/setup-dotnet@v1 and what does all of this means to someone who is a full-stack engineer trying to get off the ground as soon, easy and as fast as possible? Here's how the very same code above would look like in ADotNet:

  new SetupDotNetTaskV1
  {
      Name = "Setup .Net",

      TargetDotNetVersion = new TargetDotNetVersion
      {
          DotNetVersion = "6.0.100-rc.1.21463.6",
          IncludePrerelease = true
      }
  }

The options here are available with the power of strongly typed options and Enums. You don't have to think about what needs to go there. It's already directing you towards the options you need to get going with building your pipeline.

Dependencies & Kudos

This library relies heavily on YamlDotNet which is an amazing .NET library developed by Antoine Aubry along with so many other amazing contributors who made C# to YAML possible.

The library also leverages native .NET System.IO.File functionality to write files to a destination of the consumer's choosing.

The Architecture

The library's architecture follows The Standard. Breaking it's capabilities into brokers, services and clients. Here's a low-level architecture view of how it works:

<p align="center"> <img src="https://user-images.githubusercontent.com/89320816/137257287-b4b864a0-312e-4f86-b9c0-e436aeddaef6.png"> </p>

The abstraction of the dependencies should allow a future expansion and pluggability for any other C# to YAML components easily.

Real-Life Example for AzureDevOps

Here's something I'm using in my open source OtripleS project which is built in ASP.NET Core 6.0:

  var adoClient = new ADotNetClient();

  var aspNetPipeline = new AspNetPipeline
  {
      TriggeringBranches = new List<string>
      {
          "master"
      },

      VirtualMachinesPool = new VirtualMachinesPool
      {
          VirtualMachineImage = VirtualMachineImages.Windows2019
      },

      ConfigurationVariables = new ConfigurationVariables
      {
          BuildConfiguration = BuildConfiguration.Release
      },

      Tasks = new List<BuildTask>
      {
          new UseDotNetTask
          {
              DisplayName = "Use DotNet 6.0",

              Inputs = new UseDotNetTasksInputs
              {
                  Version = "6.0.100-preview.3.21202.5",
                  IncludePreviewVersions = true,
                  PackageType = PackageType.sdk
              }
          },

          new DotNetExecutionTask
          {
              DisplayName = "Restore",

              Inputs = new DotNetExecutionTasksInputs
              {
                  Command = Command.restore,
                  FeedsToUse = Feeds.select
              }
          },

          new DotNetExecutionTask
          {
              DisplayName = "Build",

              Inputs = new DotNetExecutionTasksInputs
              {
                  Command = Command.build,
              }
          },

          new DotNetExecutionTask
          {
              DisplayName = "Test",

              Inputs = new DotNetExecutionTasksInputs
              {
                  Command = Command.test,
                  Projects = "**/*Unit*.csproj"
              }
          },

          new DotNetExecutionTask
          {
              DisplayName = "Publish",

              Inputs = new DotNetExecutionTasksInputs
              {
                  Command = Command.publish,
                  PublishWebProjects = true
              }
          }
      }
  };

  adoClient.SerializeAndWriteToFile(aspNetPipeline, "../../azure-pipelines.yaml");

And here's the YAML output of this code:

trigger:
- master
pool:
  vmImage: 'ubuntu-latest'
variables:
  buildConfiguration: 'Release'
steps:
- task: UseDotNet@2
  displayName: 'Use DotNet 6.0'
  inputs:
    packageType: 'sdk'
    version: '6.0.100-preview.3.21202.5'
    includePreviewVersions: true
- task: DotNetCoreCLI@2
  displayName: 'Restore'
  inputs:
    command: 'restore'
    feedsToUse: 'select'
- task: DotNetCoreCLI@2
  displayName: 'Build'
  inputs:
    command: 'build'
- task: DotNetCoreCLI@2
  displayName: 'Test'
  inputs:
    command: 'test'
    projects: '**/*Unit*.csproj'
- task: DotNetCoreCLI@2
  displayName: 'Publish'
  inputs:
    command: 'publish'
    publishWebProjects: true

And finally, here's the result:

Real-Life Example for Git Actions

Here's something I'm using in my open source OtripleS project which is built in ASP.NET Core 6.0:

  var aDotNetClient = new ADotNetClient();

  var githubPipeline = new GithubPipeline
  {
      Name = "Github",

      OnEvents = new Events
      {
          Push = new PushEvent
          {
              Branches = new string[] { "master" }
          },

          PullRequest = new PullRequestEvent
          {
              Branches = new string[] { "master" }
          }
      },

      Jobs = new Jobs
      {
          Build = new BuildJob
          {
              RunsOn = BuildMachines.Windows2019,

              Steps = new List<GithubTask>
              {
                  new CheckoutTaskV2
                  {
                      Name = "Check out"
                  },

                  new SetupDotNetTaskV1
                  {
                      Name = "Setup .Net",

                      TargetDotNetVersion = new TargetDotNetVersion
                      {
                          DotNetVersion = "6.0.100-rc.1.21463.6",
                          IncludePrerelease = true
                      }
                  },

                  new RestoreTask
                  {
                      Name = "Restore"
                  },

                  new DotNetBuildTask
                  {
                      Name = "Build"
                  },

                  new TestTask
                  {
                      Name = "Test"
                  }
              }
          }
      }
  };

  aDotNetClient.SerializeAndWriteToFile(githubPipeline, "../../../../.github/workflows/dotnet.yml");

And here's the YAML output of this code:

name: Github
on:
  push:
    branches:
    - master
  pull_request:
    branches:
    - master
jobs:
  build:
    runs-on: windows-2019
    steps:
    - name: Check out
      uses: actions/checkout@v2
    - name: Setup .Net
      uses: actions/setup-dotnet@v1
      with:
        dotnet-version: 6.0.100-rc.1.21463.6
        include-prerelease: true
    - name: Restore
      run: dotnet restore
    - name: Build
      run: dotnet build --no-restore
    - name: Test
      run: dotnet test --no-build --verbosity normal

And finally, here's the result:

Some Odd Decisions

I have intentionally limited some of the capabilities in this library to ensure any contributions go to this repository so everyone can benefit from the updates. For instance, I could've easily made selecting a virtual machine as a string input to allow for anyone to pass in whatever VM they need. But the problem with that is for those who will need the same thing and have to do the same research to find the right VM for their build.

I'm intentionally making my library less usable to ensure this level of hive mindset is reflected in our changes here.

If you have any suggestions, comments, or questions, please feel free to contact me on: Twitter: @hassanrezkhabib LinkedIn: hassanrezkhabib E-Mail: hassanhabib@live.com