Akka.HealthCheck.Hosting.Web 1.5.26.1

Akka.HealthCheck.Hosting.Web

This package integrates Akka.HealthCheck, Akka.Hosting, and Microsoft.AspNetCore.Diagnostics.HealthChecks, allowing users to access Akka.HealthCheck via HTTP REST API.

Available Akka.NET Probes

The package provides 5 IHealthCheck probes that can be registered with the health check middleware, each uniquely tagged so they can be individually filtered during mapping:

1. AkkaReadinessProbe - The default readiness probe. The probe reports the time the ActorSystem was started.

   Tags: [ "akka", "ready", "node" ]

2. AkkaLivenessProbe - The default liveness probe. The probe reports the time the ActorSystem was started.

   Tags: [ "akka", "live", "node" ]

3. AkkaClusterReadinessProbe - Readiness probe for clustering.

   • Reports healthy when:
     • The ActorSystem joined a cluster.
     • The ActorSystem is connected to a cluster
   • Reports unhealthy when:
     • The ActorSystem just started has not joined a cluster.
     • All other nodes in the cluster is unreachable.

   Tags: [ "akka", "ready", "cluster" ]

4. AkkaClusterLivenessProbe - Liveness probe for clustering.

   • Reports healthy when:
     • The ActorSystem joined a cluster.
     • The ActorSystem is connected to a cluster
   • Reports unhealthy when:
     • The ActorSystem just started and has not joined a cluster.
     • The ActorSystem left the cluster.

   Tags: [ "akka", "live", "cluster" ]

5. AkkaPersistenceLivenessProbe - Liveness probe for persistence. It probes the persistence storage every second to check that persistence is working properly.

   • Reports healthy when persistence successfully recover both journal and snapshot data from storage.
   • Reports unhealthy when:
     • Persistence just started and has not recovered.
     • Either journal or snapshot failed recovery inside the periodic check.

   Tags: [ "akka", "live", "persistence" ]

Installation

There are 3 steps that needs to be done to integrate Akka.HealthCheck with diagnostic health check

• Register health check probes to the health check middleware service.
• Add Akka.HealthCheck to the ActorSystem.
• Map the health check probe routes.

Register Akka.HealthCheck Services With HealthCheck

The convenience IServiceCollection extension method WithAkkaHealthCheck(HealthCheckType) can be used to register the standard probes in any combination.

var webBuilder = WebApplication.CreateBuilder(args);
webBuilder.Services
    .WithAkkaHealthCheck(HealthCheckType.All);

As alternative, individual probes can be registered using these methods:

• WithAkkaLivenessProbe()
• WithAkkaReadinessProbe()
• WithAkkaClusterLivenessProbe()
• WithAkkaClusterReadinessProbe()
• WithAkkaPersistenceLivenessProbe()

Add Akka.HealthCheck To The ActorSystem

The convenience AkkaConfigurationBuilder extension method WithWebHealthCheck(IServiceProvider) automatically scans for any registered probes inside the health check middleware and adds the respective Akka.NET health check probes to the ActorSystem

var webBuilder = WebApplication.CreateBuilder(args);
webBuilder.Services
    .WithAkkaHealthCheck(HealthCheckType.All)
    .AddAkka("actor-system", (builder, serviceProvider) =>
    {
        // Automatically detects which health checks were registered 
        // inside the health check middleware and starts them
        builder.WithWebHealthCheck(serviceProvider);
    });

Map The Health Check Probe Routes

The convenience IEndpointRouteBuilder extension method MapAkkaHealthCheckRoutes automatically scans for any registered probes inside the health check middleware and maps all the probes to a HTTP route. The HTTP route is the concatenation of the probe tags. By default:

• AkkaReadinessProbe is mapped to "/{prefix}/akka/ready/node"
• AkkaLivenessProbe is mapped to "/{prefix}/akka/live/node"
• AkkaClusterReadinessProbe is mapped to "/{prefix}/akka/ready/cluster"
• AkkaClusterLivenessProbe is mapped to "/{prefix}/akka/live/cluster"
• AkkaPersistenceLivenessProbe is mapped to "/{prefix}/akka/live/persistence"
• All liveness probes can be queried all at once at "/{prefix}/akka/live"
• All readiness probes can be queried all at once at "/{prefix}/akka/ready"
• All Akka.NET probes can be queried all at once at ""/{prefix}/akka"

var webBuilder = WebApplication.CreateBuilder(args);

webBuilder.Services
    // Register all of the health check service with IServiceCollection
    .WithAkkaHealthCheck(HealthCheckType.All) 
    .AddAkka("actor-system", (builder, serviceProvider) =>
    {
        builder
            // Automatically detects which health checks were registered 
            // inside the health check middleware and starts them
            .WithWebHealthCheck(serviceProvider);
    });

var app = webBuilder.Build();

// Automatically detects which health checks were registered inside 
// the health check middleware and maps their routes
app.MapAkkaHealthCheckRoutes();

await app.RunAsync();

HTTP Response

By default, the health check middleware outputs a simple string response of either "healthy" or "unhealthy" regardless of the number of probes being queried. To more verbose response can be gained by using Helper.JsonResponseWriter as the route endpoint response writer.

app.MapAkkaHealthCheckRoutes(
    optionConfigure: opt =>
    {
        // Use a custom response writer to output a json of all reported statuses
        opt.ResponseWriter = Helper.JsonResponseWriter;
    });

Example output when all probes are enabled:

{
  "status": "Healthy",
  "results": {
    "akka-liveness": {
      "status": "Healthy",
      "description": "Akka.NET node is alive",
      "data": {
        "message": "Live: 12/16/2022 9:54:28 PM +00:00"
      }
    },
    "akka-readiness": {
      "status": "Healthy",
      "description": "Akka.NET node is ready",
      "data": {
        "message": "Live: 12/16/2022 9:54:28 PM +00:00"
      }
    },
    "akka-cluster-liveness": {
      "status": "Healthy",
      "description": "Akka.NET cluster is alive",
      "data": {
        "message": ""
      }
    },
    "akka-cluster-readiness": {
      "status": "Healthy",
      "description": "Akka.NET cluster is ready",
      "data": {
        "message": ""
      }
    },
    "akka-persistence-liveness": {
      "status": "Healthy",
      "description": "Akka.NET persistence is alive",
      "data": {
        "message": "RecoveryStatus(JournalRecovered=True, SnapshotRecovered=True)"
      }
    }
  }
}

Manually Setup Custom Akka.NET IProbeProvider With Health Check Middleware

To manually setup a custom IProbeProvider, check the custom probe example project.

Documentation on how to set up ASP.NET Core health check can be read here